Total Carbon (TC),
Total Organic Carbon (TOC),
Inorganic Carbon (IC),
Total Nitrogen (TN) Analyzer
Modular platform TOC is designed for:
. Building the system according to the needs of the laboratory
. Easy field upgrade
. Full automation with liquid or solid or liquid plus solid samples for all parameters including TC and IC on solid samples
. All parameters in the TOC jargon, namely TC, IC, TOC as NPOC, TOC by difference between TC and IC, TN on solid and liquid samples
. Unattended overnight operation
. Handling large amounts of solid sample up to 9 g
. Handling high carbon concentration
. Analyzing low carbon concentrations in ppbx
. Separate solid and liquid autosamplers to choose either one or both
. Up to 63 sample positions in solid and another 63 positions in liquid autosampler
. Automated and built-in acid dosing on solid and liquid samples for IC
. Patented 2-zone furnace design allowing handling large amounts of sample and higher concentrations of carbon,
while achieving very low limit of detection
Total Carbon(TC), Total Organic Carbon(TOC), Inorganic Carbon(IC) and Total Nitrogen analysis,On: Solid samples, Sludge, Non-flowing semi-fluid samples, High-carbon and/or nitrogen containing samples Can run up to 9 grams sample of solid and non-flowing nature.
Analyse TC, IC and TN on all samples including, solid, liquid or non-flowing. Acidification of the sample is automatic by the software in IC analysis. Condensate drenage is automatic by the software, no need to worry about maintenance
Combustion occurs in the patented double-furnace system that assures complete oxidation of carbon into CO2 and nitrogen into NO.
Software is originally developed for TRL-TOC-M. Report pages are configured according to the needs of the laboratory and by the initiative of the laboratory manager. Laboratory manager can assign different levels of authorities for the laboratory person to protect the data, the methods and the reports.
Operator observes the detector signal graphically and numerically, during the run period. This helps in diagnoses of the analysis cycle, as needed. Repeat analysis as many as the operator likes, is possible.
Following charts shows how to make configuration options. Every column is a configuration option. We present here 7 options. (X) sign indicates that the modular unit on this row should be included. Please do not hesitate to contact us should you need further clarification.
OPT 1 / Single Shot TC and IC on Solid Samples, Manual high TOC liquid samples
OPT 2 / Fully Automated TC, IC, TOC on Solid Samples, additionally Manual high TOC liquid samples
OPT 3 / Single Shot TC, IC, NPOC, TOC on Liquid Samples only
OPT 4 / Fully Automated TC, IC, TOC on Liquid Samples
OPT 5 / Single Shot IC on Liquid and Solid Samples
OPT 6 / Fully Automated IC on Solid and Liquid Samples
OPT 7 / Fully Automated TC, IC, NPOC, TOC on solid and liquid samples